Buzz's use of Sunn Beta Lead head & Boss ODB-3 bass OD pedal...

Started by sixteenxnine, October 24, 2011, 07:55:43 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

sixteenxnine

I'm recording soon @ Steve Albini's Electrical Audio studio next month, and I've had some equipment fall into my lap lately, including a Sunn Beta Lead head.  I also have a Boss ODB-3 bass overdrive pedal, and my guitar is a modified 1985 Harmony H732 LP body with some nice and hot Jackson humbuckers.  The trio makes for a hell of a sound, but with the Sunn head being really unusual with the way the settings apply to the sound, and the ODB-3 being primarily designed for bass, I'm wondering how Buzz gets the most out of his setup.  Are there any interviews out there that cover this?  Or a Youtube clip?

I'm NOT looking to clone his sound in my recorded material.  BUT, I'd like to set up my sound similar to his initially and then tailor it to my own guitar-playing personality.

Thanks.

(PAUL)

Here's a couple of gear walkthroughs, hope it helps a bit. Oh, and good luck with recording and I'm sorry about the cancer.

Rig Rundown - Melvins' King Buzzo


Buzz Osbourne of the Melvins Gear Tour
Hail, not fail.
PS:  fuck him.

Afterbirthmilkshake

I believe that Steve A. has had some negitive things to say about the Melvins in the press over the past years.  So while your there you should punch him in the nuts. 

as they say in the trailer home park, I'd preesheeaiter

sixteenxnine

I'm not really there to gush about the bands I love.  :D  And although I'm looking to get some initial early info on how someone masterful with this setup uses it, I'm out to make what I do sound like me above all else, with in the end almost zero regard for trying to make any of what I do sound like anyone else. 

While songwriting/jamming in my practice area over the next couple weeks I might rattle off a couple Melvins riffs for fun though.  :D

Afterbirthmilkshake

I don't believe that this response addresses the aforementioned punch in the nuts. 

sixteenxnine

lol, I really don't give a damn what Steve thinks of The Melvins; or vice versa.  I don't get worked up over rock press clippings or asides from interviews or shit like that.  That's one engineer I respect, and one band I respect, and they occupy different spaces in the universe.  How about you just punch yourself in the nuts and we'll be good...  :p

My Sunn is in the shop right now, the "A" channel didn't work...  now it does, but wiring up a footswitch will be a major challenge and I think I'll be ok with just using the head's switches and knobs...  Here's most of the email I got from the dude:

"here is the status:  I do have both channels working.  It was a huge challenge to get the knobs off the controls to pull the PCB.  One of the pots came all apart when pulling off the knob, but I was able to re-build it.  The problem was rust inside the knobs.  So, the problem with the channel switching comes down a part (MC14506B) that is not functioning properly.  Unfortunately, it is very obsolete, there are no parts available from the usual suppliers, no NTE cross reference substitute part.  I tried a couple of obsolete part specialists, and they all have $50-$100 minimum orders.  Let me know how you want to proceed."


John Schuller

Also keep in mind that someone's live rig is not necessarily what they would use in the studio. For instance all of the guitars on Earth2 were recorded through one of these little tiny amps - and the guitars on that album are some of the heaviest sounding guitars known to man.



[attachment deleted by admin]

(PAUL)

I've seen Dub Trio live a few times and I swear that amp is part of their gear.
Hail, not fail.
PS:  fuck him.

sixteenxnine

I've made that very same little amp sound big as well:


Low-Fi/Emphatic - Trust the Flow (2006) Music Video


If I don't bring my Sunn head down, I'd likely end up being plugged into an Orange head.  ... I like the Orange sound for the most part, but I much prefer the Sunn tones for what I'm developing.

sixteenxnine

Quote from: backstard on October 30, 2011, 02:51:23 PM
You don't need the foot switch for a studio setup. Just plugin to the middle input when you want to play through both channels at the same time.

Also, doesn't electrical have a ton of amps to play through?

I know this, but I'd kinda like it to be in "as new" shape.  BUT... I'm picking it up today, both channels work, and if I wanna do any sort of a footswitch thing I can use an A-B-Y switch.

Yeah, they have nice amps/heads, but they don't have any Sunn stuff; nothing sounds like a Sunn amplifier... If I didn't bring it I'd likely end up getting hooked to one of the Orange setups... I like the Orange sound, but nowhere near as much as I like my Beta Lead.  Besides it's not a big piece of equipment; it'll fit into my car just fine.

My pickups are burning hot, almost too much so.  Jackson J-50N 10.2 ohm humbucker with adjustable pole pieces on one side in the neck position, Jackson JH-2 @ 13.11 ohm (bridge position) ... this thing is almost overdriven by itself; my amp EQ adjustments whether I use the Sunn, a Peavey XXX or my little amp (Crate GT-80V with tube-pre, two 10" celestions) feel really sensitive and unusual, it's easy to get a unique sound out of this axe although I wonder if it's too hot.  The Sunn is the only amp of the trio that feels like it can handle the axe though.

Kolonel Kurtz Kobain

Quote from: Afterbirthmilkshake on October 24, 2011, 10:31:26 PM
I believe that Steve A. has had some negitive things to say about the Melvins in the press over the past years.  So while your there you should punch him in the nuts. 

as they say in the trailer home park, I'd preesheeaiter

Yours truly to Mr. Albini: "How'd you like to be mutilated, you motherfucker?"
I'd rather be at Dodger Stadium...

sixteenxnine

Really?  Just to humor myself I looked around, and what I found was that Steve has indeed mentioned the Melvins when speaking about progressive rock acts, and their name has been brought up when speaking about bands that have grown a fan base... but then I found an interview where Buzz went on a bit of a tirade generalizing about his opinions of the bands that Steve works with, as well as his occupation and his engineering style.  Personally I wasn't impressed, but again, it was just an interview, I had read other pieces where Buzz and Dale had spoken more neutrally about Steve... so all in all, none of that shit matters.  Some people see Melvins & Melvins fans as condescending elite and inclusive, and some people see Steve and the EA/PRF crowd in the same way.  They're two separate things/entities, and in my eyes I like both... separately....

Although I am mixing them a little bit, myself.... I'm using Coady's Keplinger steel snare to record my album with.  :)

(((O)))

All we need to remember is that Albini rules and Melvins rule.

John Schuller

Kepplinger snares rule. You should check out Greg Kepplinger's cymbals too. Holy shit those are insane.

sixteenxnine

I'm gonna be crapping my pants abut that snare for a while; Coady said he used it on two BB albums, MCD, Deal Low Tide, and he believes it was used on (a) Senile Animal.  What a nice guy, allowing me to use this... too bad I gotta send it back when I'm done...  :D